/*********************************************************************************
|
* Copyright: (C) 2023 LingYun IoT System Studio
|
* All rights reserved.
|
*
|
* Filename: at24c.c
|
* Description: This file is AT24Cxx EEPROM code
|
*
|
* Version: 1.0.0(10/08/23)
|
* Author: Guo Wenxue <guowenxue@gmail.com>
|
* ChangeLog: 1, Release initial version on "10/08/23 17:52:00"
|
*
|
* Pin connection:
|
* W25QXX Raspberry Pi 40Pin
|
* VCC <---> Pin#1 (3.3V)
|
* CS <---> Pin#24(CS)
|
* DO <---> Pin#21(MISO)
|
* GND <---> Pin#9 (GND)
|
* CLK <---> Pin#23(SCLK)
|
* DI <---> Pin#19(MOSI)
|
*
|
* /boot/config.txt:
|
* dtparam=spi=on
|
*
|
********************************************************************************/
|
|
#ifndef _W25QFLASH_H
|
#define _W25QFLASH_H
|
|
#include <stdbool.h>
|
|
#define _W25QXX_DEBUG 1
|
|
/* Flash opcodes. Refer to <<W25Q256JV.pdf>> P26 Table 8.1.2 Instruction Set Table */
|
#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
|
#define SPINOR_OP_RDUID 0x4b /* Read unique ID */
|
#define SPINOR_OP_WRSR1 0x01 /* Write status register-1 */
|
#define SPINOR_OP_WRSR2 0x31 /* Write status register-2 */
|
#define SPINOR_OP_WRSR3 0x11 /* Write status register-3 */
|
#define SPINOR_OP_BP 0x02 /* Byte program */
|
#define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */
|
#define SPINOR_OP_WRDI 0x04 /* Write disable */
|
#define SPINOR_OP_RDSR1 0x05 /* Read status register-1 */
|
#define SPINOR_OP_RDSR2 0x35 /* Read status register-2 */
|
#define SPINOR_OP_RDSR3 0x15 /* Read status register-3 */
|
#define SPINOR_OP_WREN 0x06 /* Write enable */
|
#define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */
|
#define SPINOR_OP_READ_FAST_4B 0x0c /* Read data bytes (high frequency) */
|
|
#define SPINOR_OP_CHIP_ERASE 0xc7 /* Erase whole flash chip */
|
#define SPINOR_OP_BE_4K_4B 0xdc /* Block erase (64KiB) with 4-Byte Address */
|
#define SPINOR_OP_BE_4K 0xd8 /* Block erase (64KiB) */
|
#define SPINOR_OP_SE_4B 0x21 /* Sector erase (4KiB) with 4-Byte Address */
|
#define SPINOR_OP_SE 0x20 /* Sector erase (4KiB) */
|
#define SPINOR_OP_PP_4B 0x12 /* Page Program (up to 256 bytes) with 4-Byte Address */
|
#define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */
|
#define SPINOR_OP_SRSTEN 0x66 /* Software Reset Enable */
|
#define SPINOR_OP_SRST 0x99 /* Software Reset */
|
|
typedef struct spi_info
|
{
|
int hspi; /* SPI device description */
|
|
void (*select)(struct spi_info *spi); /* CS enable function */
|
void (*deselect)(struct spi_info *spi); /* CS disable function */
|
void (*xcmd)(struct spi_info *spi, uint8_t command); /* Send a byte command */
|
void (*xfer)(struct spi_info *spi, uint8_t *send_buf, uint8_t *recv_buf, int bytes); /* Transmit and Receive N byte */
|
} spi_info_t;
|
|
typedef struct flash_info
|
{
|
char *name; /* Chip name */
|
uint32_t jedec_id; /* JEDEC ID, 3 bytes */
|
uint64_t capacity; /* Chip size in bytes */
|
uint32_t block_size; /* Block size in bytes */
|
uint32_t sector_size; /* Sector size in bytes */
|
uint32_t page_size; /* Page size in bytes */
|
uint32_t n_blocks; /* Number of blocks */
|
uint32_t n_sectors; /* Number of sectors */
|
uint32_t n_pages; /* Number of pages */
|
} flash_info_t;
|
|
|
typedef struct spinor_info
|
{
|
spi_info_t *spi;
|
flash_info_t *flash;
|
uint8_t lock;
|
} spinor_info_t;
|
|
|
/* Status registers */
|
enum
|
{
|
REG_STATUS1,
|
REG_STATUS2,
|
REG_STATUS3,
|
REG_STATUS_MAX,
|
};
|
|
/*+-------------------------------+
|
*| SPI Norflash HighLevel API |
|
*+-------------------------------+*/
|
|
/* SPI Norflash API test function */
|
extern void spinor_test(void);
|
|
/* Initial SPI and detect the flash chip */
|
extern int spinor_init(struct spinor_info *spinor);
|
|
/* Description: Erase whole flash chip.
|
* Reference : P60, 8.2.32 Chip Erase (C7h / 60h)
|
*/
|
extern int spinor_erase_chip(struct spinor_info *spinor);
|
|
/* Description: Erase blocks by 64KiB,
|
* Reference : P59, 8.2.31 64KB Block Erase with 4-Byte Address (DCh)
|
* @address is the erase start physical address, which can be not block alignment such as 0x10001.
|
* @size is the erase size, which can be larger than a block such as 4097, and it will erase 2 blocks;
|
*/
|
extern int spinor_erase_block(struct spinor_info *spinor, uint32_t address, uint32_t size);
|
|
/* Description: Erase sectors by 4KiB
|
* Reference : P56, 8.2.28 Sector Erase with 4-Byte Address (21h)
|
* @address is the erase start physical address, which can be not sector alignment such as 0x1001.
|
* @size is the erase size, which can be larger than a sector such as 4097, and it will erase 2 sectors;
|
*/
|
extern int spinor_erase_sector(struct spinor_info *spinor, uint32_t address, uint32_t size);
|
|
/* Description: Page random write by 256B
|
* @addr is the write start physical address, which can be not page alignment such as 0x101.
|
* @size is the write size, which can be larger than a page such as 257, and it will write 2 pages;
|
*/
|
extern int spinor_write(struct spinor_info *spinor, uint32_t address, uint8_t *data, uint32_t bytes);
|
|
/* Description: The Fast Read instruction can read the entire memory chip.
|
* Reference : P41, 8.2.13 Fast Read with 4-Byte Address (0Ch)
|
* @address is the read start physical address, which can be not page alignment such as 0x101.
|
* @size is the read size, which can be larger than a page such as 257, and it will read 2 pages;
|
*/
|
extern int spinor_read(struct spinor_info *spinor, uint32_t address, uint8_t *buf, uint32_t bytes);
|
|
/*+-------------------------------+
|
*| SPI Norflash LowLevel API |
|
*+-------------------------------+*/
|
|
/* Detect the norflash by JEDEC ID */
|
int spinor_detect_by_jedec(struct spinor_info *spinor);
|
|
/* Description: Read the chipset UNIQUE ID.
|
* Reference : P68, 8.2.40 Read Unique ID Number (4Bh)
|
*/
|
int spinor_read_uniqid(struct spi_info *spi, uint8_t *uniq_id);
|
|
/* Description: Read the chipset JEDEC ID.
|
* Reference : P69, 8.2.41 Read JEDEC ID (9Fh)
|
*/
|
uint32_t spinor_read_jedecid(struct spi_info *spi);
|
|
/* Description: Write Enable
|
* Reference : P31, 8.2.1 Write Enable (06h)
|
*/
|
void spinor_write_enable(struct spi_info *spi);
|
|
/* Description: Write Disable
|
* Reference : P32, 8.2.3 Write Disable (04h)
|
*/
|
void spinor_write_disable(struct spi_info *spi);
|
|
/* Description: Read Status Register
|
* Reference : P32, 8.2.4 Read Status Register-1 (05h), Status Register-2 (35h) & Status Register-3 (15h)
|
*/
|
uint8_t spinor_read_status_reg(struct spi_info *spi, uint8_t reg);
|
|
/* Description: Write Status Register
|
* Reference : P33, 8.2.5 Write Status Register-1 (01h), Status Register-2 (31h) & Status Register-3 (11h)
|
*/
|
void spinor_write_status_reg(struct spi_info *spi, uint8_t reg, uint8_t value);
|
|
/* Description: Wait flash program/erase finished by read Status Register for BUSY bit
|
* Reference : P15, 7.1 Status Registers
|
*/
|
void spinor_WaitForWriteEnd(struct spi_info *spi);
|
|
#endif
|
