build-imxboard.git

			@@ -13,7 +13,10 @@
			PRFX_PATH=$PRJ_PATH/install

			# binaries finally install path if needed
			INST_PATH=/tftp
			#INST_PATH=/tftp

			# download taballs path
			TARBALL_PATH=$PRJ_PATH/tarballs

			# config file path
			CONF_FILE=$TOP_PATH/config.json
			@@ -37,12 +40,61 @@
			echo -e "\033[40;32m $1 \033[0m"
			}

			# decompress a packet to destination path
			function do_unpack()
			{
			tarball=$1
			dstpath=`pwd`

			if [[ $# == 2 ]] ; then
			dstpath=$2
			fi

			pr_info "decompress $tarball => $dstpath"

			mkdir -p $dstpath
			case $tarball in
			*.tar.gz)
			tar -xzf $tarball -C $dstpath
			;;

			*.tar.bz2)
			tar -xjf $tarball -C $dstpath
			;;

			*.tar.xz)
			tar -xJf $tarball -C $dstpath
			;;

			*.tar.zst)
			tar -I zstd -xf $tarball -C $dstpath
			;;

			*.tar)
			tar -xf $tarball -C $dstpath
			;;

			*.zip)
			unzip -qo $tarball -d $dstpath
			;;

			*)
			pr_error "decompress Unsupport packet: $tarball"
			return 1;
			;;
			esac
			}

			# select firmware version by BSP version
			function export_fmver()
			{
			if [[ $BSP_VER =~ 6.1.36 ]] ; then

			export FMW_IMX=firmware-imx-8.21

			elif [[ $BSP_VER =~ 5.15.71 ]] ; then

			export FMW_IMX=firmware-imx-8.18

			fi

			@@ -56,7 +108,7 @@
			{
			export BOARD=`jq -r ".bsp.board" $CONF_FILE \| tr 'A-Z' 'a-z'`
			export BSP_VER=`jq -r ".bsp.version" $CONF_FILE \| tr 'A-Z' 'a-z'`
			export GIT_URL=`jq -r ".bsp.giturl" $CONF_FILE \| tr 'A-Z' 'a-z'`
			export BSP_URL=`jq -r ".bsp.giturl" $CONF_FILE`
			export CROSS_COMPILE=`jq -r ".bsp.cortexAtool" $CONF_FILE`
			export MCORE_COMPILE=`jq -r ".bsp.cortexMtool" $CONF_FILE`

			@@ -104,7 +156,20 @@
			fi

			pr_info "start fetch $src source code"
			git clone $GIT_URL/$src.git -b $BRANCH --depth=1

			if [[ $BSP_URL =~ github.com ]] ; then
			git clone $BSP_URL/$src.git -b $BRANCH --depth=1
			else
			mkdir -p $TARBALL_PATH

			# Download source code packet
			if [ ! -s $TARBALL_PATH/$src.tar.xz ] ; then
			wget $BSP_URL/imx/bsp/$BSP_VER/$src.tar.xz -P $TARBALL_PATH
			fi

			# decompress source code packet
			do_unpack $TARBALL_PATH/$src.tar.xz
			fi

			# do patch if patch file exist
			patch_file=$PRJ_PATH/patches/$BOARD/$src-$BSP_VER.patch
			@@ -121,6 +186,35 @@
			return ;
			fi

			# Download CortexM FreeRTOS SDK if needed
			if [ "$BUILD_MCORE" == "yes" ] ; then

			src=cortexm-sdk

			cd $PRJ_PATH

			if [ -d $src ] ; then
			pr_info "$src source code fetched already"
			else
			pr_info "start fetch $src source code"

			if [[ $BSP_URL =~ github.com ]] ; then
			pr_error "INFO: Please download $BOARD CortexM SDK from https://mcuxpresso.nxp.com by manual."
			else
			pack=cortexm-sdk-${BOARD}

			# Download source code packet
			if [ ! -s $TARBALL_PATH/$pack.tar.gz ] ; then
			wget $BSP_URL/bsp/$BSP_VER/$pack.tar.gz -P $TARBALL_PATH
			fi

			# decompress source code packet
			do_unpack $TARBALL_PATH/$pack.tar.gz $PRJ_PATH/$src
			fi
			fi
			fi

			# Download firmware from NXP official URL
			mkdir -p $FMW_PATH && cd $FMW_PATH

			for fmw in $FMWS
			@@ -155,7 +249,7 @@
			# Cortex-M SDK download from https://mcuxpresso.nxp.com/ by manual
			function build_cortexM()
			{
			SRC=mcore-sdk
			SRC=cortexm-sdk

			if [ "$BUILD_MCORE" != "yes" ] ; then
			pr_warn "Skip build Cortex-M core SDK source code '$SRC'"
			@@ -304,8 +398,8 @@
			fi

			build_atf
			build_cortexM
			build_imxboot
			build_cortexM
			}

			function do_install()
			@@ -331,6 +425,8 @@
			done

			rm -rf $PRJ_PATH/firmware
			rm -rf $PRJ_PATH/cortexm-sdk
			rm -rf $PRJ_PATH/tarballs
			rm -rf $PRFX_PATH
			}